I am attempting to install SQL Server 2008 Enterprise Trial and receive the follow error during installation.

"The SQL Server 2005 Express Tools are installed. To continue, remove the SQL Server 2005 Express Tools."

I have used Add or Remove programs to remove all components of SQL Server 2005 Express.  I have even reinstalled the Workstation Tools of SQL Server 2005 just so I could indiviually remove those tools, and then completly removed the SQL 2005 installation.

I have used regedit to search for any instance of SQL Server 2005, there is none.

There is still an entry for SQL Server Mangement Express in my all programs listing.  However trying to launch that program fails with errors, so it is partial still installed.

Can anyone tell me how to wipe out these last bits of SQL Server 2005 Express Tools?  I have tried everything I have found searching this forum to no avail.

Bill

Hi,

If we do inplace upgrade, no need to restore backups, logins and other scheduled jobs?

Am I right?

Thanks

Shashikala

First, a description of the environment.

The server is an Amazon hosted server, initially configured from an Amazon template that has Windows Server 2012 and SQL Server 2012 installed.  The "canned" sql installation does not fit our purposes, so that installation was removed and a reinstallation was performed.  The SQL Server folders were deleted from the C drive after the initial instance of SQL Server was removed.

The installations were run under a domain account with local administrator rights.  All the SQL Server services were configured to run under a domain account.  Most of the installations were performed with the ISO mounted.  There was one attempt to copy the contents of the mounted ISO to local disk and execute the setup from there.  The same errors were encountered.  The installation was also started as "run as administrator".  The same errors were encountered.

When installing SQL Server 2012 w/ SP1, as a default and only instance, on Server 2012, the following error is encountered during installation:

Error writing to file: Microsoft.SqlServer.SQLTaskConnectionsWrap.dll.   Verify that you have access to that directory.

After the installation, the db instance appears to be fine, with the exception that SSIS is not installed.  The file mentioned in the error message is found at the following location:

C:\Windows\Microsoft.NET\assembly\GAC_MSIL\Microsoft.SqlServer.SQLTaskConnectionsWrap\v4.0_11.0.0.0__89845dcd8080cc91

So, it appears as if the file is being written (unless it's supposed to be somewhere else)

Running setup again, attempting to add only SSIS to the existing installation fails with the follwing error:

The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.

I've search the installation media and there is no file named "sql.cab".

The next troubleshooting effort will be to perform the installation using the non-SP1 ISO.

The log from the initial failed installation is below.  I also can post the log for the "sql.cab" error, if that is helpful

Any ideas on what's going on?

Thanks.

Overall summary:
  Final result:                  Failed: see details below
  Exit code (Decimal):           -2068052706
  Start time:                    2014-03-03 12:58:15
  End time:                      2014-03-03 13:41:07
  Requested action:              Install

Setup completed with required actions for features.
Troubleshooting information for those features:
  Next step for IS:              Use the following information to resolve the error, and then try the setup process again.

Machine Properties:
  Machine name:                  WIN-BOARFDG10BP
  Machine processor count:       2
  OS version:                    Future Windows Version
  OS service pack:              
  OS region:                     United States
  OS language:                   English (United States)
  OS architecture:               x64
  Process architecture:          64 Bit
  OS clustered:                  No

Product features discovered:
  Product              Instance             Instance ID                    Feature                                  Language             Edition              Version         Clustered

Package properties:
  Description:                   Microsoft SQL Server 2012 Service Pack 1
  ProductName:                   SQL Server 2012
  Type:                          RTM
  Version:                       11
  Installation location:         H:\x64\setup\
  Installation edition:          Standard

  Slipstream:                    True
  SP Level                       1

Product Update Status:
  User selected not to include product updates.

User Input Settings:
  ACTION:                        Install
  ADDCURRENTUSERASSQLADMIN:      false
  AGTSVCACCOUNT:                 LMSCORP\prd_sql
  AGTSVCPASSWORD:                *****
  AGTSVCSTARTUPTYPE:             Automatic
  ASBACKUPDIR:                   D:\MSSQL\MSAS11.MSSQLSERVER\OLAP\Backup
  ASCOLLATION:                   Latin1_General_CI_AS
  ASCONFIGDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
  ASDATADIR:                     D:\MSSQL\MSAS11.MSSQLSERVER\OLAP\Data
  ASLOGDIR:                      E:\MSSQL\MSAS11.MSSQLSERVER\OLAP\Log
  ASPROVIDERMSOLAP:              1
  ASSERVERMODE:                  MULTIDIMENSIONAL
  ASSVCACCOUNT:                  LMSCORP\prd_sql
  ASSVCPASSWORD:                 *****
  ASSVCSTARTUPTYPE:              Automatic
  ASSYSADMINACCOUNTS:            LMSCORP\gwilkerson, LMSCORP\prd_sql
  ASTEMPDIR:                     F:\MSSQL\MSAS11.MSSQLSERVER\OLAP\Temp
  BROWSERSVCSTARTUPTYPE:         Disabled
  CLTCTLRNAME:                   PDDB1_DRC
  CLTRESULTDIR:                  C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
  CLTSTARTUPTYPE:                Manual
  CLTSVCACCOUNT:                 LMSCORP\prd_sql
  CLTSVCPASSWORD:                *****
  CLTWORKINGDIR:                 C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
  COMMFABRICENCRYPTION:          0
  COMMFABRICNETWORKLEVEL:        0
  COMMFABRICPORT:                0
  CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140303_125507\ConfigurationFile.ini
  CTLRSTARTUPTYPE:               Manual
  CTLRSVCACCOUNT:                LMSCORP\prd_sql
  CTLRSVCPASSWORD:               *****
  CTLRUSERS:                     LMSCORP\gwilkerson, LMSCORP\prd_sql
  ENABLERANU:                    false
  ENU:                           true
  ERRORREPORTING:                false
  FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK
  FILESTREAMLEVEL:               0
  FILESTREAMSHARENAME:           <empty>
  FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher
  FTSVCPASSWORD:                 <empty>
  HELP:                          false
  IACCEPTSQLSERVERLICENSETERMS:  true
  INDICATEPROGRESS:              false
  INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
  INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
  INSTALLSQLDATADIR:             D:\MSSQL
  INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
  INSTANCEID:                    MSSQLSERVER
  INSTANCENAME:                  MSSQLSERVER
  ISSVCACCOUNT:                  LMSCORP\prd_sql
  ISSVCPASSWORD:                 *****
  ISSVCSTARTUPTYPE:              Automatic
  MATRIXCMBRICKCOMMPORT:         0
  MATRIXCMSERVERNAME:            <empty>
  MATRIXNAME:                    <empty>
  NPENABLED:                     0
  PID:                           *****
  QUIET:                         false
  QUIETSIMPLE:                   false
  ROLE:                          <empty>
  RSINSTALLMODE:                 DefaultNativeMode
  RSSHPINSTALLMODE:              SharePointFilesOnlyMode
  RSSVCACCOUNT:                  LMSCORP\prd_sql
  RSSVCPASSWORD:                 *****
  RSSVCSTARTUPTYPE:              Automatic
  SAPWD:                         *****
  SECURITYMODE:                  SQL
  SQLBACKUPDIR:                  <empty>
  SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
  SQLSVCACCOUNT:                 LMSCORP\prd_sql
  SQLSVCPASSWORD:                *****
  SQLSVCSTARTUPTYPE:             Automatic
  SQLSYSADMINACCOUNTS:           LMSCORP\gwilkerson, LMSCORP\prd_sql
  SQLTEMPDBDIR:                  F:\MSSQL\MSSQL11.MSSQLSERVER\MSSQL\Data
  SQLTEMPDBLOGDIR:               E:\MSSQL\MSSQL11.MSSQLSERVER\MSSQL\Data
  SQLUSERDBDIR:                  <empty>
  SQLUSERDBLOGDIR:               E:\MSSQL\MSSQL11.MSSQLSERVER\MSSQL\Data
  SQMREPORTING:                  false
  TCPENABLED:                    1
  UIMODE:                        Normal
  UpdateEnabled:                 false
  UpdateSource:                  MU
  X86:                           false

  Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140303_125507\ConfigurationFile.ini

Detailed results:
  Feature:                       Management Tools - Complete
  Status:                        Passed

  Feature:                       Client Tools Connectivity
  Status:                        Passed

  Feature:                       Client Tools SDK
  Status:                        Passed

  Feature:                       Client Tools Backwards Compatibility
  Status:                        Passed

  Feature:                       Management Tools - Basic
  Status:                        Passed

  Feature:                       SQL Server Data Tools
  Status:                        Passed

  Feature:                       Reporting Services - Native
  Status:                        Passed

  Feature:                       Database Engine Services
  Status:                        Passed

  Feature:                       Data Quality Services
  Status:                        Passed

  Feature:                       Full-Text and Semantic Extractions for Search
  Status:                        Passed

  Feature:                       SQL Server Replication
  Status:                        Passed

  Feature:                       Distributed Replay Client
  Status:                        Passed

  Feature:                       Distributed Replay Controller
  Status:                        Passed

  Feature:                       Integration Services
  Status:                        Failed: see logs for details
  Reason for failure:            An error occurred during the setup process of the feature.
  Next Step:                     Use the following information to resolve the error, and then try the setup process again.
  Component name:                SQL Server Integration Services
  Component error code:          1310
  Component log file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140303_125507\sql_is_Cpu64_1.log
  Error description:             Error writing to file: Microsoft.SqlServer.SQLTaskConnectionsWrap.dll.   Verify that you have access to that directory.
  Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=sql_is.msi%40InstallFiles%401310

  Feature:                       Data Quality Client
  Status:                        Passed

  Feature:                       Analysis Services
  Status:                        Passed

  Feature:                       Reporting Services - SharePoint
  Status:                        Passed

  Feature:                       Reporting Services Add-in for SharePoint Products
  Status:                        Passed

  Feature:                       SQL Browser
  Status:                        Passed

  Feature:                       Documentation Components
  Status:                        Passed

  Feature:                       SQL Writer
  Status:                        Passed

  Feature:                       SQL Client Connectivity
  Status:                        Passed

  Feature:                       SQL Client Connectivity SDK
  Status:                        Passed

Rules with failures:

Global rules:

Scenario specific rules:

Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140303_125507\SystemConfigurationCheck_Report.htm

The Local Server Groups display under Registered Servers has disappeared.  In fact all groups under Registered Servers are not visible.   I have the same problem posted by DBA_Reaper and moderated by Alberto Morillo.   Bottom line is I see NO ANSWER to this problem.  Same situation:  SQL Srv Mgmt Studio (SSMS) 2012;  new installation on new PC; Under Registered Servers there is NOTHING....no groups to right-click therefore nothing you can do.   Here's the scenario....New installation so I got an import of a fellow DBA colleague's Registered SQL Server entries from their SSMS 2012 setup.   When I tried to import the Registered Servers into my newly installed SSMS 2012 the application shutdown.  When I restarted SSMS everything in "Registered Servers" was blank....NO GROUPS of any type.     I de-installed the full SQL Server 2012 software and deleted the remnant folders under Program Files and then re-installed SSMS 2012.    Same problem existed....no groups under the Registered Servers window.   

Yes, you can connect to a SQL Engine and then right-click to register that connected server.  It accepts that registration but it does not display that under Registered Servers.   If I try to register that same servername again it echoes that that particular servername entry already exists in 'Local Server Groups'.    Great!...Right??   NOPE !!!   Even though SSMS thinks it has a Local Server Groups folder it is NOT displaying it under the Registered Servers Windows.   OK...maybe its hiding using some HIDE function.  NOPE...been there done that!   Found some related HIDE function but that was not it !!

 Tried again to de-install the entire SSMS 2012 along with all SQL Server 2012 software.  Even spent hours combing through the registry to remove all keys and sub-keys related to SQL Server...then rebooted...then re-installed again.   The problem still existed in that all groups including 'Local Server Groups"  was not showing up under SSMS 2012.

So I challenge anyone with good troubleshooting skills to come up with some troubleshooting steps to work towards a solution.  This one is just frustrating.

Hello, 

I would like to try Standard Edition of SQL Server 2012. Where I can download it?

I followed this link www.microsoft.com/en-us/sqlserver/get-sql-server/try-it.aspx and downloaded and installed. But when I check in SQL Server Management Studio (Mangement Studio->Server->Properties->Generals->Product), it shows "Microsoft SQL Server Enterprise Evaluation (64-bit)".

As I don't need Enterprise Edition for my project, I would like to test with Standard Edition for few days before purchasing.

Please advise.

Thanks in advanced.

Hi

My SQL SERVER 2012 Trial version has expired.

I now wish to install SQL Server Express and migrate my databases to this version. The DBs are compatible with the Express version.

Can this be done where the DBs are not backed up and as the Trial has expired can't be backed up?

Thank you

John 

Ive a problem with a new installation of SQL 2008 R2.  We've got 2 servers, one of them with Standard and the other with Premium Adon, we're trying to install SQL 2008 on the second serverr and we don't know how to continue because we get a compatibility error.

 When wizard check the operating system fail and not be able continue. How can i fix this ? 

THANKS

I have a server originally setup with SQL Server 2008 Standard edition.  All servers are currently running  SQL Server 2008.

Software was installed which installed SQL Server 2008 R2 express edition on this server.

Now I can not maintain my maintenance plans using SQL SERVER 2008 Management Studios.

I understand the concept to common components and that R2 version is higher and the common components

now run as R2.

What I have read, to get rid of the R2 Express Edition, I have to remove both versions of SQL Server and then reinstall

SQL Server 2008 Standard edition.

Is this my only solution, has anyone else been able to get rid of the Express version without uninstall both versions.

Marsha

I've installed SQL server on a machine, rebooted, renamed the machine, rebooted, now I'm trying to set up SQL with the new name.

When I run SELECT @@SERVERNAME, I get the old servername.  When I run sp_dropserver OLDSERVERNAME, it tells me that the server does not exist.

When I run sp_addserver NEWSERVERNAME, it tells me that it already exists.  So when I re-run SELECT @@SERVERNAME it again shows me OLDSERVERNAME.

What am I doing wrong here?

while i am trying to install SQLServer 2008 i face this error, please help me

TITLE: SQL Server Setup failure.
------------------------------

SQL Server Setup has encountered the following error:

MsiGetProductInfo failed to retrieve ProductVersion for package with Product Code = '{CC8BA866-16A7-4667-BA0C-C494A1E7B2BF}'. Error code: 1608..

------------------------------
BUTTONS:

OK
------------------------------

Hello Friends,

what is the difference between sql server 2008 R2 Enterprise andsql server 2008 R2 Standard edition?

Currently we are using sql server 2008 R2 enterprise and we are going to update it by sql server 2008 R2 standard edition.

what will be the problems arise if we are updating by standard edition?

Please give me reply ASAP.

Thank You,

Sonal Patel

Hello experts,

I have a SQL Server 2005 Instance running on "Windows Server Enterprise without Hyper-v" OS (this is the operating system name showing in the my computer properties) now i want to install another instance of SQL Server 2008 SP1 on the same server. I have different disk drives available for data,log and temp files. Basically this instance will be used for mirroring with another SQL Server 2008 SP1 (with .Net framework 4.5) running on Windows Server 2008 Enterprise .

Could you please provide your suggestion/ experience on the following questions,

-->Does the installation of MS SQL Server 2008 SP1 is supported on "Windows Server Enterprise without Hyper-v" OS?
-->Installation of MS SQL Server 2008 and MS SQL Server 2005 side by side is supported on "Windows Server Enterprise without Hyper-v" OS?
-->If Yes, which version of .Netframe work should I use, (.Net 3.5SP1 or 4.5)
-->If I use Net 3.5 SP1 Framework does it have any impact when I do mirroring with my principle SQL Server 2008 SP1 (with .Net framework 4.5)
--> Also during/after the installation does it requires any system reboot?


regards,
Jakk 

How can we check last taken backup time ?

Thanks

Shashikala

hi all,

i have gone through the thread which had the same subject but still it didn't work out..

i have even removed SQL 2005 install bits using msicuu2.exe but still i can find SQL 2005 in my programs list in start menu....

Can anyone please let me know how i can remove SQL 2005 completely when it does not show up in Add/Remove programs and WindowsInstaller Cleanup Tool but i can still find it if i navigate to Start --> All programs --> Microsoft SQL Server 2005......

regards,

Hi

I have an SQL Server 2012 SP1 ion WS 2008 R2 standard nstallation which I want to add features to. But I am unable to make it work ?

When I click the link in the installation centre nothing happens. Control panel - add feature, I point to installation folder and get a black command type box then nothing. So I copied the the installation folder tto the C: DRIVE Tried setup from command prompt . This is the erorr

 SQL SERVER 2012 SETUP ERROR -2067529723 RESULT
FACILITY CODE 12220

I have spent over 11 hours trying to resolve this issue. This si the errror log

28/2014 14:02:20.688 Attempting to launch local setup.exe
02/28/2014 14:02:20.689 Attempting to launch process C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\setup.exe
02/28/2014 14:25:11.612 Process returned exit code: 0x00000BC2
02/28/2014 14:25:11.666 Local setup.exe returned exit code: 0x00000BC2
02/28/2014 14:25:11.709 Setup closed with exit code: 0x84C40013
02/28/2014 14:25:11.725 ======================================================================

PLEASE HELP

Hi,

Can anyone send a document to configure Clustering and Replication in production server.

Thanks in advance

Shashikala.

Shashikala

Getting a Code 84B30002. Yes I know, there already some threads that deal about this but Icouldn't find my answer....

From what I can understand, I'm trying to update a SQL SERVER 2008 SP3 patch on a SQL SERVER 2008 R2 SP3 which they are not compatible from what I can understand. (see bellow for details).

However, I'm not sure why I'm getting a prompt to update it in windows update (I'm using windows 8.1). Anyone have a clue ? it look like windows update should be smart enough to ignore that update.... 

Any fix / workaround to get rid of that update ?

C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140228_205643\Detail.txt

thanks,

Hi,

Backup senario is as below

Monday-Full backup @ 5:PM(backup database mirroring to disk='f:\backup\full.bkp')

Transaction backup is happening once in a hour like 6PM,7PM,8PM....etc

Tuesday-taken differential backup @ 2:PM.

Transactional backup is happening onc ein a hour

Wednesday: Taken differential backup @ 2:PM

Server is crashed @ 3:25.

How can I recover the database till this time.

Please provide me a querry for the same.

Thanks in advance

Shashikala

HI,

Getting this dotnet error as soon as i start installation. ee the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.Configuration.ConfigurationErrorsException: An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings: Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified. (C:\Users\ashish\AppData\Local\Microsoft_Corporation\LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx\10.0.0.0\user.config line 5) ---> System.IO.FileNotFoundException: Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified.
File name: 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
   at System.Configuration.TypeUtil.GetTypeWithReflectionPermission(IInternalConfigHost host, String typeString, Boolean throwOnError)
   at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.Init(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
   at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.InitWithRestrictedPermissions(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
   at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory..ctor(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
   at System.Configuration.RuntimeConfigurationRecord.CreateSectionFactory(FactoryRecord factoryRecord)
   at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

   --- End of inner exception stack trace ---
   at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)
   at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
   at System.Configuration.BaseConfigurationRecord.GetSection(String configKey, Boolean getLkg, Boolean checkPermission)
   at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
   at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(String sectionName)
   at System.Configuration.ConfigurationManager.GetSection(String sectionName)
   at System.Configuration.ClientSettingsStore.ReadSettings(String sectionName, Boolean isUserScoped)
   at System.Configuration.LocalFileSettingsProvider.GetPropertyValues(SettingsContext context, SettingsPropertyCollection properties)
   at System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider)
   at System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName)
   at System.Configuration.SettingsBase.get_Item(String propertyName)
   at System.Configuration.ApplicationSettingsBase.GetPropertyValue(String propertyName)
   at System.Configuration.ApplicationSettingsBase.get_Item(String propertyName)
   at Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings.get_WindowPlacement()
   at Microsoft.SqlServer.Configuration.LandingPage.LandingPageForm.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5466 (Win7SP1GDR.050727-5400)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
LandingPage
    Assembly Version: 10.0.0.0
    Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
    CodeBase: file:///I:/SQL%202008%20DEV/x86/LandingPage.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5468 (Win7SP1GDR.050727-5400)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Microsoft.SqlServer.Configuration.Sco
    Assembly Version: 10.0.0.0
    Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
    CodeBase: file:///I:/SQL%202008%20DEV/x86/Microsoft.SqlServer.Configuration.Sco.DLL
----------------------------------------
Microsoft.SqlServer.Chainer.Infrastructure
    Assembly Version: 10.0.0.0
    Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
    CodeBase: file:///I:/SQL%202008%20DEV/x86/Microsoft.SqlServer.Chainer.Infrastructure.DLL
----------------------------------------
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Accessibility
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
Microsoft.SqlServer.Management.Controls
    Assembly Version: 10.0.0.0
    Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
    CodeBase: file:///I:/SQL%202008%20DEV/x86/Microsoft.SqlServer.Management.Controls.DLL
----------------------------------------
System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Hello, 

          I am Manikumar, I am using Windows 8 Pro edition and i want install SQL Server 2012 RTM Version in my pc so my system configuration ,i have mentioned below

Processor: AMD Althon(tm) 64 X2 Dual Core Processor 

RAM: 1 gb

System Type : 32 bit os

So I just want to know ,what are prerequisites and how to installations process,please tell me.I wnat to install immediately.

Thank You